Dyno Day? 55$ :-)

Post by **Dion.Rentos** » Mon Jan 28, 2013 11:04 am

Dyno Day?

Who would be up for Dyno Day?

Got a local Shop willing to give 5 or more SCC Gold members 2 Pulls and print out for 55$

I just had mine done but i would join for the fun. Unless i make a good change and want to see the update

Only thing is we have to pay upfront. because he said clubs in the past never bring the agreed amount of cars.

Since we only need 5+

So who is in?

Post by **AntiPriuSS** » Mon Jan 28, 2013 11:28 am

would greatly depend on when for me.

Post by **Dion.Rentos** » Mon Jan 28, 2013 11:34 am

Just wanted to get a idea if we even had 5 members to do it.

I will add a poll and we will see

Post by **AntiPriuSS** » Mon Jan 28, 2013 7:59 pm

I posted as a maybe Im saving for more mods so it would really depend on how close I am to getting another mod on if I would do it or not.

Post by **skybrake** » Mon Jan 28, 2013 9:02 pm

Intrigued...very...I have seen the sheets from before before "Mod-erating " bo.
Curious as to how successful ive been at calming her down.

I have Querys tho :

What secures your car from flying off that thing into the wall or slapping side to side on the rails?
( I would cry... if bo got splattered...literally.)

Do you drive it on that thing and make the run.... or do they?
( Peepers requires surgical skills to navigate tight spaces)

Whats the minimum speed you/they must take it to, to get a proper read ?
(discover ...the true speed rating...as centrifugal force de-beads them)

Other than HP and torque at the wheels...what else could it tell me about my "moderations" to bo-peep.
(Keeping in mind Bo has the computing power of a toaster )

Post by **Romelan** » Mon Jan 28, 2013 9:37 pm

I put a maybe because I am not sure I would have that cash laying around in a few weeks...

Post by **AntiPriuSS** » Tue Jan 29, 2013 8:32 pm

skybrake wrote:Intrigued...very...I have seen the sheets from before before "Mod-erating " bo.
Curious as to how successful ive been at calming her down.

I have Querys tho :

What secures your car from flying off that thing into the wall or slapping side to side on the rails?
( I would cry... if bo got splattered...literally.)

Do you drive it on that thing and make the run.... or do they?
( Peepers requires surgical skills to navigate tight spaces)

Whats the minimum speed you/they must take it to, to get a proper read ?
(discover ...the true speed rating...as centrifugal force de-beads them)

Other than HP and torque at the wheels...what else could it tell me about my "moderations" to bo-peep.
(Keeping in mind Bo has the computing power of a toaster )

1. They get strapped down pretty tightly. Best movie Ive seen yet showing he straps.

2. Typically for insurance reason they drive it up on the dyno. Typically its a strait shot up on to it.

3. They typically do a high gear run. They ran Kalcorps car up to 155 just when ever the gear tops out for the most part.

4. Pretty much thats it just HP and Torque at the wheels. Youll also hear out loud it is or in your case how calmed down she is.

Oh and Lucy says a toaster could be used to launch a person into space so Bo is more like a abacus

Post by **xXSilencerXx** » Thu Jan 31, 2013 7:10 pm

Who's dyno? When? I would love to get some numbers on the TA.

Post by **1JEWLDSSRS** » Thu Jan 31, 2013 9:15 pm

skybrake wrote:Intrigued...very...I have seen the sheets from before before "Mod-erating " bo.
Curious as to how successful ive been at calming her down.

I have Querys tho :

What secures your car from flying off that thing into the wall or slapping side to side on the rails?
( I would cry... if bo got splattered...literally.)

Do you drive it on that thing and make the run.... or do they?
( Peepers requires surgical skills to navigate tight spaces)

Whats the minimum speed you/they must take it to, to get a proper read ?
(discover ...the true speed rating...as centrifugal force de-beads them)

Other than HP and torque at the wheels...what else could it tell me about my "moderations" to bo-peep.
(Keeping in mind Bo has the computing power of a toaster )

TJ's shop is a pretty open shop with a dynojet dyno, he backs the car up onto the dyno and then raises it up some to strap the car down.They strap the car via a point on the chassis in the front on both sides, and also in the rear at two points also on each side, the car is VERY secured at this point. The straps are so tight the car won't move side to side.When I did mine at Lashway motorsports in Pompano Bch they had a mustang dyno and when the car was strapped down front and back, they even strapped it side to side for safety, Some shops will do that, I don't know if TJ does or not. He has had many high horse power cars on his dyno.. Bo would be OK.. Normally they run the car depending on the tranny in 4th gear I believe and they run it up to about 6000rpm, just before redline on my dyno pull sheet. HP fell off at about 5500 but my TQ leveled out at 5800-6000.All depends on the numbers I guess as to how high you need to run it..

Post by **skybrake** » Thu Jan 31, 2013 10:05 pm

Thanks for the answers gang !

spearous · Post by **spearous** » Mon Feb 11, 2013 2:27 pm

I would like to go but think I want to get my oil leak fixed first before I did it.

Post by **Eric** » Mon Feb 11, 2013 7:10 pm

I would be interested in going if this is still going to happen. Would need to know what day in advance obviously. Would like to get a base line to see where I am at.

MI2000SS · Post by **MI2000SS** » Sat Feb 16, 2013 8:09 pm

i would love to go, to get the numbers on the ss finally. but it depends on the day, hence the maybe.

Post by **rsv07** » Sat Feb 16, 2013 9:26 pm

I too would like to get a baseline before I start modding. It'd just depend on what day it is.

omega552003 · Post by **omega552003** » Tue Feb 19, 2013 9:41 pm

I had a coworker tell me about SCC and that you're looking to do a dyno day. I've got a 97 z28 that i need get some pulls on to do some tuning.

Post by **Dion.Rentos** » Tue Feb 19, 2013 9:46 pm

omega552003 wrote:I had a coworker tell me about SCC and that you're looking to do a dyno day. I've got a 97 z28 that i need get some pulls on to do some tuning.

Welcome to jump in with us when we do it.

Also did you want to join SCC?
Link --> http://spacecoastcamaros.com/scc/ucp.php?i=176
use that link and select SCC members and submit to join.

Post by **xXSilencerXx** » Thu Feb 21, 2013 7:24 pm

Any idea of when this is projected to happen?

FunkedOut · Post by **FunkedOut** » Sat Mar 23, 2013 7:04 pm

Post by **Dion.Rentos** » Sat Mar 23, 2013 7:42 pm

I will try to get this going since we got 5+ people that want in

omega552003 · Post by **omega552003** » Thu Apr 04, 2013 8:15 pm

I'm really itching for a dyno, especially after my recent 1/4 runs.

Post by **xXSilencerXx** » Wed Apr 10, 2013 5:26 pm

2 month old thread, if people are down for it we should get it setup instead of just talking about it. I'd love to get some numbers on my TA.

Post by **Dion.Rentos** » Sun Apr 21, 2013 10:57 am

OK so how do we want to do this?

We need to Pay the shop for 5 members first to schedule it. then more can come

So we need to pick the Dyno Day. and then also pick a day before where 5 members show up to pay.

omega552003 · Post by **omega552003** » Sun Apr 21, 2013 11:26 am

I say cuatro de mayo. How far in advance do they need the $?

Post by **rsv07** » Sun Apr 21, 2013 12:31 pm

I'm out of town that weekend.

Post by **xXSilencerXx** » Mon Apr 22, 2013 9:30 pm

I'm still down as long it's not the weekend of the 11th, otherwise if you let me know far enough in advance I've got nothing else planned next month.

Post by **Dion.Rentos** » Mon May 13, 2013 5:15 pm

Looks like we have enough people for this I wanted to wait until after I got my supercharger but I'll do it before then

Post by **xXSilencerXx** » Sat Jun 22, 2013 7:38 pm

This still in the works? I'll be TDY all of July so I'm out until August, at which point I'll be more than willing to go.

Post by **Dion.Rentos** » Sun Jun 23, 2013 8:23 am

They moved to a bigger shop in play bay.

So we can set this up soon if everyone wants

Post by **AntiPriuSS** » Sun Jun 23, 2013 11:39 am

Im game now that I have a semi reason to want to dyno my car.

Lets get a date set and stop footing around this.

omega552003 · Post by **omega552003** » Sun Jun 23, 2013 11:56 am

AntiPriuSS wrote:Lets get a date set and stop footing around this.

Word

Post by **AntiPriuSS** » Sun Jun 23, 2013 12:15 pm

I guess the real question will be will trick pro still honor the 55 dollar dyno day since we have been talking about this for about 6 months now.

Post by **AntiPriuSS** » Wed Jun 26, 2013 12:17 pm

Looking at the calendar we have nothing on July 27 I say we see if we can arrange our dyno day for then.

Post by **1JEWLDSSRS** » Wed Jun 26, 2013 5:49 pm

I'm still game for this/

Post by **xXSilencerXx** » Wed Jun 26, 2013 9:19 pm

AntiPriuSS wrote:Looking at the calendar we have nothing on July 27 I say we see if we can arrange our dyno day for then.

Wait until the week after and I'll be back in FL! That's the last weekend of my TDY.

Post by **AntiPriuSS** » Mon Jul 01, 2013 11:54 am

I really don't care when we do this we just need to get a date set and get it booked with trick pro

Post by **Dion.Rentos** » Sat Aug 03, 2013 10:22 am

I will be talking to them this week. going down to show to check it out.

Post by **xXSilencerXx** » Mon Aug 05, 2013 7:38 pm

Sweet! I'm still down to do this.

Post by **AntiPriuSS** » Thu Aug 22, 2013 8:45 pm

any word on this?

Post by **Dion.Rentos** » Mon Nov 25, 2013 5:59 pm

Ok with my new SS i want in on this also. ( no point in doing it for my LLT since i did it already)

We need 4 more members to step up. pick a day and we need to go down and pay the man and select a day.

Hope more members will jump in after we have it set up!

omega552003 · Post by **omega552003** » Tue Nov 26, 2013 4:25 pm

I just dyno'd last week, found that i have some tweaks to do, but i dont think it would be worth to dyno again since i'm close to swaping out the motor.

Post by **Dion.Rentos** » Tue Nov 26, 2013 4:57 pm

omega552003 wrote:I just dyno'd last week, found that i have some tweaks to do, but i dont think it would be worth to dyno again since i'm close to swaping out the motor.

Please update your vote at top so we can get a good count

Since i didnt need to do the dyno in the past. ( already did one) I was not pushing for this. Was hoping someone else would step up and make this happen.

But i like to get a dyno done now so it looks like i have to do it.

Post by **rsv07** » Tue Nov 26, 2013 5:53 pm

I'm still down.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

spearous · Post by **spearous** » Tue Nov 26, 2013 8:37 pm

I would like to but afraid lol, I like my car in one piece ;p

Post by **Rsoetidjo** » Wed Nov 27, 2013 4:29 pm

spearous wrote:I would like to but afraid lol, I like my car in one piece ;p

You'll be fine.

spearous · Post by **spearous** » Wed Nov 27, 2013 8:49 pm

yea guess your right, I need to get it done I want to see where its at before I get new/rebuilt engine and other stuff done to the car.

Post by **1JEWLDSSRS** » Wed Nov 27, 2013 10:13 pm

Still game..

Post by **Dion.Rentos** » Fri Jan 31, 2014 12:48 pm

OK need 5 members to come with me to shop and pay the man. once we have that then we can schedule the day!

spearous · Post by **spearous** » Tue Nov 25, 2014 3:24 pm

whats the word with dyno, I want to do it now engine is rebuilt!!!!

CRF8 · Post by **CRF8** » Wed Nov 26, 2014 8:03 am

the OP is old, did they ever do it?
where is the shop? I would consider going

Post by **Dion.Rentos** » Wed Nov 26, 2014 9:29 am

I will check with them again to see if we can do it.

Connect with your social network account

Want to attend a $55 DYNO Day with other SCC members?